switch
Code evaluation script which uses debug_backtrace() to get execution time in ns, relative current line number, function, file, and calling function info on each tick, and shove it all in $script_stats array. See debug_backtrace manual to customize what info is collected.
Warning: this will exhaust allowed memory very easily, so adjust tick counter according to the size of your code. Also, array_key_exists checking on debug_backtrace arrays is removed here only to keep this example simple, but should be added to avoid a large number of resulting PHP Notice errors.
<?php
$script_stats = array();
$time = microtime(true);
function track_stats(){
global $script_stats,$time;
$trace = debug_backtrace();
$exe_time = (microtime(true) - $time) * 1000;
$func_args = implode(", ",$trace[1]["args"]);
$script_stats[] = array(
"current_time" => microtime(true),
"memory" => memory_get_usage(true),
"file" => $trace[1]["file"].': '.$trace[1]["line"],
"function" => $trace[1]["function"].'('.$func_args.')',
"called_by" => $trace[2]["function"].' in '.$trace[2]["file"].': '.$trace[2]["line"],
"ns" => $exe_time
);
$time = microtime(true);
}
declare(ticks = 1);
register_tick_function("track_stats");
// the rest of your project code
// output $script_stats into a html table or something
?>
declare
L'élément de langage declare sert à ajouter des directives d'exécutions dans un bloc de code. La syntaxe de declare est similaire à la syntaxe des autres fonctions de contrôle :
Exemple #1 Instruction directive
declare (directive) commandes
L'expression directive permet de contrôler l'intervention du bloc declare. Actuellement, une seule directive est reconnue : la directive ticks (Voir plus bas pour plus de détails) sur les ticks).
L'expression commandes du bloc de declare sera exécutée. Comment elle sera exécutée, et quels effets cela aura dépend de la directive utilisée dans le bloc directive.
La structure declare peut aussi être utilisée dans le contexte global. Elle affecte alors tout le code qui la suit :
Exemple #2 Instruction directive en contexte global
<?php
// Ces déclaration sont identiques.
// Vous pouvez utiliser ceci
declare(ticks=1) {
// script entier ici
}
// ou ceci
declare(ticks=1);
// script entier ici
?>
Ticks
Un tick est un événement qui intervient toutes les N commandes bas niveau, exécutées par l'analyseur dans le bloc de declare. La valeur de N est spécifiée avec la syntaxe ticks=N dans le bloc de directive declare.
Un événement qui intervient à chaque tick est spécifié avec la fonction register_tick_function(). Reportez-vous à l'exemple ci-dessous pour plus de détails. Notez que plus d'un événement peut intervenir par tick.
Exemple #3 Profiler une section de code PHP
<?php
// Un fonction qui enregistre l'heure à laquelle elle est appelée
function profile($dump = FALSE){
static $profile;
// Retourne les horaires stockés dans le profile, et l'efface
if ($dump) {
$temp = $profile;
unset($profile);
return $temp;
}
$profile[] = microtime ();
}
// Enregistre un gestionnaire de tick
register_tick_function("profile");
// Initialise la fonction avant le bloc de déclaration
profile();
// Exécute un bloc de code, et appele un tick toutes les deux secondes
declare (ticks=2) {
for ($x = 1; $x < 50; ++$x) {
echo similar_text(md5($x), md5($x*$x)), "<br />";
}
}
// Affiche les données de la variable $profile
print_r(profile(TRUE));
?>
Les ticks sont bien pratiques pour déboguer, pour implémenter un système multi-tâches simple, pour gérer des entrées sorties en tâche de fond, ou bien d'autres choses, avec PHP.
Voir aussi register_tick_function() et unregister_tick_function().
add a note
User Contributed Notesdeclare
anotheruser at example dot com
23-Aug-2008 11:50
23-Aug-2008 11:50
zabmilenko at charter dot net
08-Jan-2008 09:49
08-Jan-2008 09:49
If you misspell the directive, you won't get any error or warning. The declare block will simply act as a nest for statements:
<?php
declare(tocks="four hundred")
{
// Has no affect on code and produces
// no error or warning.
}
?>
Tested in php 5.2.5 on XPsp2
rsemil at gmail dot com
06-Jan-2008 02:30
06-Jan-2008 02:30
rosen_ivanov's solution can be replaced by a simple call to memory_get_peak_usage() if you're running at least PHP 5.2.0
rosen_ivanov at abv dot bg
28-Aug-2006 01:06
28-Aug-2006 01:06
As Chris already noted, ticks doesn't make your script multi-threaded, but they are still great. I use them mainly for profiling - for example, placing the following at the very beginning of the script allows you to monitor its memory usage:
<?php
function profiler($return=false) {
static $m=0;
if ($return) return "$m bytes";
if (($mem=memory_get_usage())>$m) $m = $mem;
}
register_tick_function('profiler');
declare(ticks=1);
/*
Your code here
*/
echo profiler(true);
?>
This approach is more accurate than calling memory_get_usage only in the end of the script. It has some performance overhead though :)
aeolianmeson at NOSPAM dot blitzeclipse dot com
30-May-2006 07:06
30-May-2006 07:06
The scope of the declare() call if used without a block is a little unpredictable, in my experience. It appears that if placed in a method or function, it may not apply to the calls that ensue, like the following:
<?php
function a()
{
declare(ticks=2);
b();
}
function b()
{
// The declare may not apply here, sometimes.
}
?>
So, if all of a sudden the signals are getting ignored, check this. At the risk of losing the ability to make a mathematical science out of placing a number of activities at varying durations of ticks like many people have chosen to do, I've found it simple to just put this at the top of the code, and just make it global.
warhog at warhog dot net
18-Dec-2005 08:39
18-Dec-2005 08:39
as i read about ticks the first time i thought "wtf, useless crap" - but then i discovered some usefull application...
you can declare a tick-function which checks each n executions of your script whether the connection is still alive or not, very usefull for some kind of scripts to decrease serverload
<?php
function check_connection()
{ if (connection_aborted())
{ // do something here, e.g. close database connections
// (or use a shutdown function for this
exit; }
}
register_tick_function("connection");
declare (ticks=20)
{
// put your PHP-Script here
// you may increase/decrease the number of ticks
}
?>
chris-at-free-source.com
28-Feb-2005 08:16
28-Feb-2005 08:16
Also note that PHP is run in a single thread and so everything it does will be one line of code at a time. I'm not aware of any true threading support in PHP, the closest you can get is to fork.
so, declare tick doens't "multi-thread" at all, it is simply is a way to automaticaly call a function every n-lines of code.
fok at nho dot com dot br
08-Jul-2003 01:45
08-Jul-2003 01:45
This is a very simple example using ticks to execute a external script to show rx/tx data from the server
<?php
function traf(){
passthru( './traf.sh' );
echo "<br />\n";
flush(); // keeps it flowing to the browser...
sleep( 1 );
}
register_tick_function( "traf" );
declare( ticks=1 ){
while( true ){} // to keep it running...
}
?>
contents of traf.sh:
# Shows TX/RX for eth0 over 1sec
#!/bin/bash
TX1=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $9}'`
RX1=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $1}'`
sleep 1
TX2=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $9}'`
RX2=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $1}'`
echo -e "TX: $[ $TX2 - $TX1 ] bytes/s \t RX: $[ $RX2 - $RX1 ] bytes/s"
#--= the end. =--
daniel@swn
01-Feb-2003 07:56
01-Feb-2003 07:56
<?php
ob_end_clean();
ob_implicit_flush(1);
function a() {
for($i=0;$i<=100000;$i++) { }
echo "function a() ";
}
function b() {
for($i=0;$i<=100000;$i++) { }
echo "function b() ";
}
register_tick_function ("a");
register_tick_function ("b");
declare (ticks=4)
{
while(true)
{
sleep(1);
echo "\n<br><b>".time()."</b><br>\n";;
}
}
?>
You will see that a() and b() are slowing down this process. They are in fact not executed every second as expected. So this function is not a real alternative for multithreading using some slow functions..there is no difference to this way: while (true) { a(); b(); sleep(1); }
xxoes
08-Jan-2003 10:23
08-Jan-2003 10:23
If i use ticks i must declare all functions before i call the function.
example:
Dosn't work
<?php
function ticks() {
echo "tick";
}
register_tick_function("ticks");
declare (ticks=1) 1;
echo "";
echo "";
foo(); // Call to undefined function.
function foo() {
echo "foo";
}
?>
Work
<?php
function ticks() {
echo "tick";
}
register_tick_function("ticks");
//declare (ticks=1) 1;
echo "";
echo "";
foo();
function foo() {
echo "foo";
}
?>
win2k : PHP 4.3.0 (cgi-fcgi)
rob_spamsux at rauchmedien dot ihatespam dot com
19-Mar-2002 10:45
19-Mar-2002 10:45
Correction to above note:
Apparently, the end brace '}' at the end of the statement causes a tick.
So using
------------
declare (ticks=1) echo "1 tick after this prints";
------------
gives the expected behavior of causing 1 tick.
Note: the tick is issued after the statement executes.
Also, after playing around with this, I found that it is not really the multi-tasking I had expected. It behaves the same as simply calling the functions. I.e. each function must finish before passing the baton to the next function. They do not run in parallel.
It also seems that they always run in the order in which they were registered.
So,
<?php
------------
# register tick functions
register_tick_function ("a");
register_tick_function ("b");
# make the tick functions run
declare (ticks=1);
?>
------------
is equivalent to
------------
a();
b();
------------
It is simply a convenient way to have functions called periodically while some other code is being executed. I.e. you could use it to periodically check the status of something and then exit the script or do something else based on the status.
rob_spamsux at rauchmedien dot ihatespam dot com
19-Mar-2002 09:58
19-Mar-2002 09:58
Here is an example of multi-tasking / multi-threading:
<?php
# declare functions
function a() {
echo "a";
}
function b() {
echo "b";
}
# register tick functions
register_tick_function ("a");
register_tick_function ("b");
# make the tick functions run
declare (ticks=1);
# that's all there is to it.
?>
Notes:
This will make functions a and b run once each at the same time.
If you try:
declare (ticks=1) {
1;
}
They will run twice each. That is because it seems to be an undocumented fact that there is always an extra tick.
Therefore:
declare (ticks=2) {
1;
}
Will cause them to run once.