Last updated: Fri, 22 Aug 2008

error_reporting

(PHP 4, PHP 5)

error_reporting — Define cuáles errores de PHP son reportados

Descripción

int error_reporting ([ int $nivel ] )

La función error_reporting() establece la directiva error_reporting en tiempo de ejecución. PHP tiene varios niveles de errores, el uso de esta función define ese nivel para la duración (tiempo de ejecución) de su script.

Lista de parámetros

nivel

El nuevo nivel de error_reporting. Recibe una máscara de bits, o constantes con nombre. El uso de constantes con nombre es bastante recomendable para asegurar la compatibilidad con versiones futuras. A medida que se agregan niveles de error, el rango de los enteros se incrementa, así que los niveles de error antiguos basados en enteros no siempre se comportarán como es de esperarse.

Las constantes de nivel de error disponibles se listan a continuación. Los significados reales de estos niveles de error son descritos en las constantes predefinidas.

**Constantes de nivel de **error_reporting()** y valores de bit**
valor	constante
1	E_ERROR
2	E_WARNING
4	E_PARSE
8	E_NOTICE
16	E_CORE_ERROR
32	E_CORE_WARNING
64	E_COMPILE_ERROR
128	E_COMPILE_WARNING
256	E_USER_ERROR
512	E_USER_WARNING
1024	E_USER_NOTICE
6143	E_ALL
2048	E_STRICT
4096	E_RECOVERABLE_ERROR

Valores retornados

Devuelve el nivel error_reporting antiguo.

Registro de cambios

Versión	Descripción
5.0.0	Se introdujo `E_STRICT` (no es parte de `E_ALL`).
5.2.0	Se introdujo `E_RECOVERABLE_ERROR`.
6	`E_STRICT` se hizo parte de `E_ALL`.

Ejemplos

Example #1 Ejemplos de error_reporting()


<?php

// Deshabilitar todo reporte de errores
error_reporting(0);

// Errores de ejecución simples
error_reporting(E_ERROR | E_WARNING | E_PARSE);

// Reportar E_NOTICE puede ser bueno también (para reportar variables
// no inicializadas o capturar equivocaciones en nombres de variables ...)
error_reporting(E_ERROR | E_WARNING | E_PARSE | E_NOTICE);

// Reportar todos los errores excepto E_NOTICE
// Este es el valor predeterminado en php.ini
error_reporting(E_ALL ^ E_NOTICE);

// Reportar todos los errores de PHP (el valor de bits 63 puede ser usado en PHP 3)
error_reporting(E_ALL);

// Lo mismo que error_reporting(E_ALL);
ini_set('error_reporting', E_ALL);

?>

Notes

Warning

La mayoría de errores E_STRICT son evaluados en tiempo de compilación, por lo que tales errores no son reportados en el archivo en donde error_reporting sea modificado para incluir errores E_STRICT (y vice-versa).

Ver también

La directiva display_errors
ini_set()

restore_error_handler

error_log

Last updated: Fri, 22 Aug 2008

add a note User Contributed Notes
error_reporting

info at hephoz dot de
14-Aug-2008 01:34


If you just see a blank page instead of an error reporting and you have no server access so you can't edit php configuration files like php.ini try this:



- create a new file in which you include the faulty script:



<?php

 error_reporting(E_ALL);

 ini_set("display_errors", 1);

 include("file_with_errors.php");

?>



- execute this file instead of the faulty script file 



now errors of your faulty script should be reported.

this works fine with me. hope it solves your problem as well!

kc8yds at gmail dot com
10-Aug-2008 06:45


this is to show all errors for code that may be run on different versions





for php 5 it shows E_ALL^E_STRICT and for other versions just E_ALL





if anyone sees any problems with it please correct this post





<?php


ini_set('error_reporting', version_compare(PHP_VERSION,5,'>=') && version_compare(PHP_VERSION,6,'<') ?E_ALL^E_STRICT:E_ALL);


?>

derek at darkcolors dot com
27-May-2008 08:12


I had the problem that if there was an error, php would just give me a blank page.  Any error at all forced a blank page instead of any output whatsoever, even though I made sure that I had error_reporting set to E_ALL, display_errors turned on, etc etc.  But simply running the file in a different directory allowed it to show errors!



Turns out that the error_log file in the one directory was full (2.0 Gb).  I erased the file and now errors are displayed normally.  It might also help to turn error logging off.

bbaez at biospectra dot com
10-May-2007 12:02


frederick noted this in 2005 but want to stress the point here



If you set error_reporting in httpd.conf or within a script (some PHP versions) then you must use the integer value and not the string:



Example httpd.conf:

E_ALL ^ E_NOTICE would be:

php_value error_reporting 6135



otherwise the error will not display during output.

antickon AT gmail.com
04-Apr-2007 12:21


regarding what vdephily at bluemetrix dot com said ( see http://be.php.net/manual/en/function.error-reporting.php#50228 )



<?php

echo $foobar->field;

?>



also initializes $foobar (as an instance of stdClass), so this code will not cause any notices.

bitagenda at gmail dot com
09-Mar-2007 04:36


A simple and effective way to catch Fatal errors.


From here you can go forward with your own ideas and elaborate a detailed error report.





The principle is simple and ready to test on your system





Fatal errors are not currently catched and you should have display errors off in production sites, but may be you need to test the system so you want a fast an easy way to see fatal errors in your currently running site, without the users seeing those Fatal errors as recomended.





You must have this function





<?php


function catchFatalErrors($p_OnOff='On'){


    ini_set('display_errors','On');


    $phperror='><div id="phperror" style="display:none">';


    ini_set('error_prepend_string',$phperror);


    $phperror='</div>><form name="catcher" action="/sos.php" method="post" ><input type="hidden" name="fatal"  value=""></form> <script> document.catcher.fatal.value = document.getElementById("phperror").innerHTML; document.catcher.submit();</script>';


    ini_set('error_append_string',$phperror);


}





Now activate your fatal error catcher





catchFatalErrors();


?>





Just to test write this inexistent function





<?php


    Bitagenda();


?>





That's all. As you can see there will be a form posted with action="/sos.php", of course you can name this page at your liking, in this case is at the site's root.





Have ready your page sos.php, and elaborate on that. Of course change the mail address to yours,and display a message to the user at your liking.





<?php


if (isset($_POST['fatal'])){


 error_log($_POST['fatal'],1,'bitagenda@gmail.com');


}


?>





 "System Out of Service. Thanks for waiting."





The other fact about this handler is that even if you do not redirect the Fatal Error, prepending


><div style="display:none">


and appending


</div>





Then writting yor personal message





" Sorry, fatal bug."





Will hide the fatal error message from the user, but will be visible in the browsers soure code view.





What happens if you redirect the page before displaying the error? I don´t know, have not tested, but at least you could do it to alert you that a fatal error exists and possibly the fatal error is not displayed (leading to security and at the same time catching the fatal error). Then you could activate this error handler with post-redirection to see what's going on.





;o)





Bitagenda

Alex
19-Jan-2007 11:43


error_reporting() may give unexpected results if the @ error suppression directive is used.



<?php

 @include 'config.php';

 include 'foo.bar';        // non-existent file

?>



config.php

<?php

 error_reporting(0);

?>



will throw an error level E_WARNING in relation to the non-existent file (depending of course on your configuration settings).  If the suppressor is removed, this works as expected.



Alternatively using ini_set('display_errors', 0) in config.php will achieve the same result.  This is contrary to the note above which says that the two instructions are equivalent.

silvan at NOSPAM dot example dot com
04-Oct-2006 01:38


On a shared debugging and production server it is convenient to use

<?php error_reporting(E_ALL); ?>

for debugging.



This will not help in case of parsing errors, so make sure you enable at least E_PARSE in your php.ini. Parse errors should not exist in production scripts.



Still, sometimes your script will not get executed even though no parse error is displayed (just a blank page/ no output at all). As far as I know this only happens when you redeclare a user function or class. 



eg.

<?php

error_reporting(E_ALL);



function a(){}

function a(){}

?>



This prevents your script from running like a parse error, but is in fact a fatal run-time error (E_ERROR). Other fatal run-time errors will allow your script to apply the error_reporting, when it is executed before the 

error occurs (eg. put error_reporting on the first line of code.)

Chris
09-May-2006 08:32


I found some simple mistakes in the functions I posted yesterday, so here are the corrected versions.

And a good advice: never code in the middle of the night ;)



<?php

function error2string($value)

{

    $level_names = array(

        E_ERROR => 'E_ERROR', E_WARNING => 'E_WARNING',

        E_PARSE => 'E_PARSE', E_NOTICE => 'E_NOTICE',

        E_CORE_ERROR => 'E_CORE_ERROR', E_CORE_WARNING => 'E_CORE_WARNING',

        E_COMPILE_ERROR => 'E_COMPILE_ERROR', E_COMPILE_WARNING => 'E_COMPILE_WARNING',

        E_USER_ERROR => 'E_USER_ERROR', E_USER_WARNING => 'E_USER_WARNING',

        E_USER_NOTICE => 'E_USER_NOTICE' );

    if(defined('E_STRICT')) $level_names[E_STRICT]='E_STRICT';

    $levels=array();

    if(($value&E_ALL)==E_ALL)

    {

        $levels[]='E_ALL';

        $value&=~E_ALL;

    }

    foreach($level_names as $level=>$name)

        if(($value&$level)==$level) $levels[]=$name;

    return implode(' | ',$levels);

}

?>



<?php

function string2error($string)

{

    $level_names = array( 'E_ERROR', 'E_WARNING', 'E_PARSE', 'E_NOTICE',

        'E_CORE_ERROR', 'E_CORE_WARNING', 'E_COMPILE_ERROR', 'E_COMPILE_WARNING',

        'E_USER_ERROR', 'E_USER_WARNING', 'E_USER_NOTICE', 'E_ALL' );

    if(defined('E_STRICT')) $level_names[]='E_STRICT';

    $value=0;

    $levels=explode('|',$string);

    foreach($levels as $level)

    {

        $level=trim($level);

        if(defined($level)) $value|=(int)constant($level);

    }

    return $value;

}

?>

the_bug_the_bug at hotmail dot com
24-Apr-2006 01:20


In response to simon at firepages dot com dot au below:



I wrote a shorter more efficient function which will return a string containing the names of the error levels set in the .ini file:



<?php

function error_level_tostring($intval, $separator)

{

    $errorlevels = array(

        2047 => 'E_ALL',

        1024 => 'E_USER_NOTICE',

        512 => 'E_USER_WARNING',

        256 => 'E_USER_ERROR',

        128 => 'E_COMPILE_WARNING',

        64 => 'E_COMPILE_ERROR',

        32 => 'E_CORE_WARNING',

        16 => 'E_CORE_ERROR',

        8 => 'E_NOTICE',

        4 => 'E_PARSE',

        2 => 'E_WARNING',

        1 => 'E_ERROR');

    $result = '';

    foreach($errorlevels as $number => $name)

    {

        if (($intval & $number) == $number) {

            $result .= ($result != '' ? $separator : '').$name; }

    }

    return $result;

}

?>



P.S. With a little modification this function can be made to show the string values of any enumeration.

dave at davidhbrown dot us
06-Apr-2006 03:51


The example of E_ALL ^ E_NOTICE is a 'bit' confusing for those of us not wholly conversant with bitwise operators.



If you wish to remove notices from the current level, whatever that unknown level might be, use & ~ instead:



<?php

//....

$errorlevel=error_reporting();

error_reporting($errorlevel & ~E_NOTICE);

//...code that generates notices

error_reporting($errorlevel);

//...

?>



^ is the xor (bit flipping) operator and would actually turn notices *on* if they were previously off (in the error level on its left). It works in the example because E_ALL is guaranteed to have the bit for E_NOTICE set, so when ^ flips that bit, it is in fact turned off. & ~ (and not) will always turn off the bits specified by the right-hand parameter, whether or not they were on or off.

DarkGool
19-Aug-2005 05:30


In phpinfo() error reporting level display like a bit (such as 4095)





Maybe it is a simply method to understand what a level set on your host


if you are not have access to php.ini file





<?php


$bit = ini_get('error_reporting');


while ($bit > 0) {


    for($i = 0, $n = 0; $i <= $bit; $i = 1 * pow(2, $n), $n++) {


        $end = $i;


    }


    $res[] = $end;


    $bit = $bit - $end;


}


?>





In $res you will have all constants of error reporting


$res[]=int(16) // E_CORE_ERROR 


$res[]=int(8)    // E_NOTICE 


...

fredrik at demomusic dot nu
22-Jul-2005 11:24


Remember that the error_reporting value is an integer, not a string ie "E_ALL & ~E_NOTICE". 





This is very useful to remember when setting error_reporting levels in httpd.conf:





Use the table above or: 





<?php


ini_set("error_reporting", E_YOUR_ERROR_LEVEL);


echo ini_get("error_reporting");


?>





To get the appropriate integer for your error-level. Then use:





php_admin_value error_reporting YOUR_INT





in httpd.conf





I want to share this rather straightforward tip as it is rather annoying for new php users trying to understand why things are not working when the error-level is set to (int) "E_ALL" = 0...





Maybe the PHP-developers should make ie error_reporting("E_ALL"); output a E_NOTICE informative message about the mistake?

phpfanat at yandex dot ru
22-Feb-2005 05:03


If you get a weird mysql warnings like "Warning: mysql_query() [http://www.mysql.com/doc]: Your query requires a full tablescan...", don't look for error_reporting settings - it's set in php.ini.

You can turn it off with

ini_set("mysql.trace_mode","Off");

in your script



And, as of my opinion, it should be NOTICE, not WARNING level.

vdephily at bluemetrix dot com
22-Feb-2005 11:40


Note that E_NOTICE will warn you about uninitialized variables, but assigning a key/value pair counts as initialization, and will not trigger any error :

<?php

error_reporting(E_ALL);



$foo = $bar; //notice : $bar uninitialized



$bar['foo'] = 'hello'; // no notice, although $bar itself has never been initialized (with "$bar = array()" for example)



$bar = array('foobar' => 'barfoo');

$foo = $bar['foobar'] // ok



$foo = $bar['nope'] // notice : no such index

?>

Fernando Piancastelli
13-Dec-2004 09:23


The error_reporting() function won't be effective if your display_errors directive in php.ini is set to "Off", regardless of level reporting you set. I had to set



display_errors = On

error_reporting = ~E_ALL



to keep no error reporting as default, but be able to change error reporting level in my scripts.

I'm using PHP 4.3.9 and Apache 2.0.

ferozzahid [at] usa [dot] com
08-Sep-2004 11:31


To be enable to switch between error_reporting during development and release phases, one can define say 'php_error_reporting' in the main configuration file (ini like file: no PHP) for the application as:





# config.ini


# PHP error reporting. supported values are given below.


# 0 - Turn off all error reporting


# 1 - Running errors


# 2 - Running errors + notices


# 3 - All errors except notices and warnings


# 4 - All errors except notices


# 5 - All errors





php_error_reporting=4





# config.ini ends





Setting error_reporting in PHP files would be something like the code below, assuming the function getinivar() returns the variable value from the configuration file.





<?php


// setting PHP error reporting


switch(getinivar('php_error_reporting')) {


case 0: error_reporting(0); break;


case 1: error_reporting(E_ERROR | E_WARNING | E_PARSE); break;


case 2: error_reporting(E_ERROR | E_WARNING | E_PARSE | E_NOTICE); break;


case 3: error_reporting(E_ALL ^ (E_NOTICE | E_WARNING)); break;


case 4: error_reporting(E_ALL ^ E_NOTICE); break;


case 5: error_reporting(E_ALL); break;


default:


    error_reporting(E_ALL);


}


?>





Feroz Zahid.

jernberg at fairytale dot se
27-Feb-2003 11:27


tip: if you want your error_reporting()-setting to work with your own error handler you could simply check the error number against the current error bitmask.





<?php


function myErrorHandler( $errno, $errstr, $errfile, $errline )


{


  $replevel = error_reporting();


  if( ( $errno & $replevel ) != $errno )


  {


    // we shall remain quiet.


    return;


  }


  echo( "error....." );


}


?>

rbt at zort.ca
10-Feb-2002 04:25


It should be noted that in apache.conf files the defined values (constants) don't work.  For E_ALL logging, one would use:





php_admin_value error_reporting 2047

j dot schriver at vindiou dot com
03-Oct-2000 06:37


error_reporting() has no effect if you have defined your own error handler with set_error_handler()





[Editor's Note: This is not quite accurate.





E_ERROR, E_PARSE, E_CORE_ERROR, E_CORE_WARNING, E_COMPILE_ERROR and E_COMPILE_WARNING error levels will be handled as per the error_reporting settings.





All other levels of errors will be passed to the custom error handler defined by set_error_handler().





Zeev Suraski suggests that a simple way to use the defined levels of error reporting with your custom error handlers is to add the following line to the top of your error handling function:





if (!($type & error_reporting())) return;





 -zak@php.net]

03-Feb-2000 07:31


The E_NOTICE error reporting level reports the use of undefined variables as an error.





For example:


error_reporting(E_ALL); # Set error reporting to highest level


if ($foo)            # This will generate an error


  print "bar";       # because $foo is not defined





To avoid this behavior, use isset to test if the given


variable has been defined.





For example:


error_reporting(E_ALL);


if (isset ($foo))


    print "bar";

webmaster at l-i-e dot com
21-May-1999 09:13


[Editor's Note: E_ALL will contain the result of OR'ing all of the applicable error constants together. For PHP 3, this will be the first 4 E_xxx constants.  For PHP 4, this will be all constants. ]





There is also an E_ALL which is the first 4 E_xxx added up for you...

add a note

restore_error_handler

error_log

Last updated: Fri, 22 Aug 2008